| Number |
2019-0061 |
| Issued by |
 Europe |
| Issue date |
2019-03-25 |
| Effective date |
2019-04-01 |
| EASA approval number |
|
| ATA Chapter |
72 |
Approval Holder
/ Type Designation |
-
GE AVIATION CZECH
-
M601
-
M601D
-
M601D-1
-
M601D-11
-
M601D-11NZ
-
M601D-2
-
M601E
-
M601E-11
-
M601E-11A
-
M601E-11AS
-
M601E-11S
-
M601E-21
-
M601F
-
M601FS
-
M601Z
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
This AD supersedes EASA AD 2016-0025-E dated 26 January 2016, including its
Correction dated 27 January 2016, and EASA AD 2017-0100 dated 08 June 2017.
|
| Publication(s) and related information |
GE Aviation Czech ASB-M601E-72-50-00-0069, ASB-M601D-72-50-00-0052,
ASB-M601T-72-50-00-0028, ASB-M601F-72-50-00-0035 and ASB-M601Z-72-50-00-0038 (single
document), original issue dated 21 February 2017 and Revision 1 dated 15 March 2019.
The use of later approved revisions of this document is acceptable for compliance with the
requirements of this AD. |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. Based on the required actions and the compliance time, EASA have decided to issue a Final AD with Request for Comments, postponing the public consultation process until after publication.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section,
Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
|
