Number |
2019-0181R1 |
Issued by |
Europe |
Issue date |
2019-11-12 |
Effective date |
2019-11-19 |
EASA approval number |
|
Contributor |
Large Aeroplanes Department |
ATA Chapter |
53 |
Approval Holder / Type Designation |
|
Revision |
This AD revises EASA AD 2019-0181 dated 26 July 2019.
|
Correction |
Not applicable
|
Supersedure |
None
|
Publication(s) and related information |
Airbus SB A350-53-P045 original issue dated 19 December 2018.
Airbus SB A350-53-P046 original issue dated 19 December 2018.
Airbus SB A350-53-P011 original issue dated 17 December 2018.
Airbus SB A350-53-P012 original issue dated 17 December 2018.
The use of later approved revisions of the above-mentioned documents is acceptable for
compliance with the requirements of this AD. |
PAD number |
19-018R1 |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. The original issue of this AD was posted on 05 February 2019 as PAD 19-018 for consultation
until 05 March 2019 and republished on 14 June 2019 as PAD 19-018R1 for additional
consultation until 28 June 2019. The Comment Response Document can be found in the EASA
Safety Publications Tool, in the compressed (zipped) file attached to the record for this AD.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued
Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on
a product, part or appliance not affected by this AD, can be reported to the EU aviation safety
reporting system.
|