Safety Publications Tool
leading to the decision not to take AD action similar to Federal Aviation Administration (FAA) AD 2019-24-01
2020-0020-E : [Correction] Airplane Flight Manual – Abnormal / Normal Procedures Sections – Amendment
EASA approval number
EASA Large Aeroplanes Department
/ Type Designation
Airbus AFM TR 123 was published as issue 1, rather than issue 1.1. The issue date on the TR was amended as well. Consequently, this AD is republished to correct these references.
Publication(s) and related information
Airbus A350 AFM TR 123 Issue 1 dated 05 February 2020. The use of later approved revisions of the above-mentioned document is acceptable for compliance with the requirements of this AD. Airbus FOT 999.0006/20 original issue dated 31 January 2020.
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. The results of the safety assessment have indicated the need for immediate publication and notification, without the full consultation process. 3. Enquiries regarding this AD should be referred to the EASA Programming and Continued Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu. 4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.
EASA_AD_2020_0020_E_C1.pdf (494 kb)
For help on using this tool, please refer to
the help section
For any inquiry regarding ADs, please contact
the EASA AD team
To report any bug, broken link or problem with this application, please contact the
Disclaimer & copyright notice
- 2006 ©