You are not logged in
  Safety Publications Tool

2020-0131 : Equipment / Furnishings – Hoist Cable Cutter Frame – Modification

Number 2020-0131
Issued by Europe  Europe
Issue date 2020-06-05
Effective date 2020-06-12
EASA approval number
Contributor EASA VTOL Department
ATA Chapter 25
Approval Holder
/ Type Designation
  • LEONARDO S.p.A. HELICOPTERS
    • AB139/AW139
      • AB139
      • AW139
Revision Not applicable
Correction Not applicable
Supersedure None
Publication(s) and related information Leonardo S.p.A. Helicopters ASB 139-637, original issue dated 05 June 2020. The use of later approved revisions of the above-mentioned document is acceptable for compliance with the requirements of this AD.
Remarks 1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. Based on the required actions and the compliance time, EASA have decided to issue a Final AD with Request for Comments, postponing the public consultation process until after publication. 3. Enquiries regarding this AD should be referred to the EASA Programming and Continued Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu. 4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system.

Download attachments: