| Publication(s) and related information |
Dassault Falcon 7X AFM DGT105608, CP0149 dated 18 June 2020 and CP0156 dated 10 January 2020.
Dassault Falcon 8X AFM DGT147681, CP0149 dated 18 June 2020 and CP0156 dated 10 January 2020.
Dassault Falcon 2000EX EASy version AFM DGT88898, CP0114 dated 18 June 2020 and CP0122 dated 10 January 2020.
Dassault Falcon 900EX EASy version AFM DGT84972, CP0155 dated 18 June 2020 and CP0162 dated 10 January 2020. |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. Based on the required actions and the compliance time, EASA have decided to issue a Final AD with Request for Comments, postponing the public consultation process until after publication.
3. Enquiries regarding this AD should be referred to the EASA Programming and Continued Airworthiness Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
|
