Safety Publications Tool
2020-0191R1 : Equipment / Furnishings – Forward Facing Central Seat(s) – Removal
EASA approval number
EASA VTOL Department
/ Type Designation
LEONARDO S.p.A. HELICOPTERS
This AD revises EASA AD 2020-0191 dated 04 September 2020.
Publication(s) and related information
Leonardo S.p.A. Helicopters ASB 139-633 original issue dated 05 August 2020 and Revision A dated 02 September 2020. Leonardo S.p.A. Helicopters SB 139-678 original issue dated 05 July 2022. The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD.
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. Based on the required actions and the compliance time, EASA have decided to issue a Final AD with Request for Comments, postponing the public consultation process until after publication. 3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu. 4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
EASA_AD_2020_0191_R1.pdf (216 kb)
EASA_AD_2020_0191.zip (1 mb)
For help on using this tool, please refer to
the help section
For any inquiry regarding ADs, please contact
the EASA AD team
To report any bug, broken link or problem with this application, please contact the
Disclaimer & copyright notice
- 2021 ©