| Number |
2021-0006 |
| Issued by |
 Europe |
| Issue date |
2021-01-07 |
| Effective date |
2021-01-21 |
| EASA approval number |
|
| ATA Chapter |
73 |
Approval Holder
/ Type Designation |
-
ROLLS-ROYCE DEUTSCHLAND Ltd & Co KG
-
TRENT 1000
-
Trent 1000-A
-
Trent 1000-A2
-
Trent 1000-AE
-
Trent 1000-AE2
-
Trent 1000-C
-
Trent 1000-C2
-
Trent 1000-CE
-
Trent 1000-CE2
-
Trent 1000-D
-
Trent 1000-D2
-
Trent 1000-E
-
Trent 1000-E2
-
Trent 1000-G
-
Trent 1000-G2
-
Trent 1000-H
-
Trent 1000-H2
-
Trent 1000-J2
-
Trent 1000-K2
-
Trent 1000-L2
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
This AD supersedes EASA AD 2020-0154 dated 10 July 2020.
|
| Publication(s) and related information |
Rolls-Royce Trent 1000 Alert NMSB 73-AK581 original issue dated 12 May 2020, or Revision 1 dated 18 June 2020 and Revision 2 dated 02 December 2020.
The use of later approved revisions of the above-mentioned document is acceptable for compliance with the requirements of this AD. |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. This AD was issued on 08 December 2020 as PAD 20-194 for consultation until 22 December 2020. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
|
