Safety Publications Tool
2021-0223-E : Flight Controls – Elevator Control Rod – Inspection / Modification / Replacement
EASA approval number
EASA General Aviation Department
/ Type Designation
HPH SPOL.S R.O.
Glasfluegel 304 MS
Glasfluegel 304 S
Glasfluegel 304 eS
Publication(s) and related information
HPH SB G304MS-12b), G304S-12b) and G304eS-12b), published as a single document, original issue dated 05 October 2021. The use of later approved revisions of the above-mentioned document is acceptable for compliance with the requirements of this AD.
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. The results of the safety assessment have indicated the need for immediate publication and notification, without the full consultation process. 3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu. 4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
EASA_AD_2021_0223_E.pdf (202 kb)
For help on using this tool, please refer to
the help section
For any inquiry regarding ADs, please contact
the EASA AD team
To report any bug, broken link or problem with this application, please contact the
Disclaimer & copyright notice
- 2021 ©