Number |
2021-0248R1 |
Issued by |
Europe |
Issue date |
2022-10-12 |
Effective date |
2022-10-19 |
EASA approval number |
|
Contributor |
EASA Large Aeroplanes Department |
ATA Chapter |
05 |
Approval Holder / Type Designation |
-
AIRBUS S.A.S.
-
A330
-
A330-201
-
A330-202
-
A330-203
-
A330-223
-
A330-223F
-
A330-243
-
A330-243F
-
A330-301
-
A330-302
-
A330-303
-
A330-321
-
A330-322
-
A330-323
-
A330-341
-
A330-342
-
A330-343
-
A330-841
-
A330-941
|
Revision |
This AD revises EASA AD 2021-0248 dated 15 November 2021.
|
Correction |
Not applicable
|
Supersedure |
The original issue of this AD superseded EASA AD 2019-0049 dated 11 March 2019.
|
Publication(s) and related information |
Airbus A330 ALS Part 3 Revision 07 dated 01 July 2021.
The use of later approved revisions of variations of the above-mentioned document is acceptable
for compliance with the requirements of this AD. |
PAD number |
21-150 |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. The original issue of this AD was posted on 14 October 2021 as PAD 21-150 for consultation
until 11 November 2021. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section,
Certification Directorate; E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on
a product, part or appliance not affected by this AD, can be reported to the EU aviation safety
reporting system. This may include reporting on the same or similar components, other than
those covered by the design to which this AD applies, if the same unsafe condition can exist or
may develop on an aircraft with those components installed. Such components may be
installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate
(STC) or other modification.
|