You are not logged in
  Safety Publications Tool

EAD 2022-0209-E : Harness Installation – Forward Roof Area – Inspection

Number 2022-0209-E
Issued by Europe  Europe
Issue date 2022-10-12
Effective date 2022-10-14
EASA approval number
Contributor EASA VTOL Department
ATA Chapter 91
Approval Holder
/ Type Designation
  • LEONARDO S.p.A. HELICOPTERS
    • AB139/AW139
      • AB139
      • AW139
Revision Not applicable
Correction Not applicable
Supersedure None
Publication(s) and related information Leonardo ASB 139-731 original issue dated 11 October 2022. The use of later approved revisions of the above-mentioned document is acceptable for compliance with the requirements of this AD.
Remarks 1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. The results of the safety assessment have indicated the need for immediate publication and notification, without the full consultation process. 3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu. 4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.