Number |
2023-0062 |
Issued by |
Europe |
Issue date |
2023-03-20 |
Effective date |
2023-04-03 |
EASA approval number |
|
ATA Chapter |
05 |
Approval Holder / Type Designation |
-
DASSAULT AVIATION
-
Mystère-Falcon 20
-
Mystère-Falcon 20C5
-
Mystère-Falcon 20D5
-
Mystère-Falcon 20E5
-
Mystère-Falcon 20F5
|
Revision |
Not applicable
|
Correction |
Not applicable
|
Supersedure |
This AD supersedes EASA AD 2019-0201 dated 20 August 2019.
|
Publication(s) and related information |
Dassault Mystere-Falcon 20 AMM ALS, Chapter 5-40 (DMD 45184) Revision 11 dated July 2022.
Dassault Mystere-Falcon 20 SB 730 original issue 23 February 1990, or Revision 1 dated 12
December 1990.
The use of later approved revisions of the above-mentioned documents is acceptable for
compliance with the requirements of this AD. |
PAD number |
23-025 |
Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. This AD was posted on 17 February 2023 as PAD 23-025 for consultation until 17 March 2023. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section,
Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be
installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate
(STC) or other modification.
|