| Number |
2023-0170 |
| Issued by |
 Europe |
| Issue date |
2023-09-06 |
| Effective date |
2023-09-20 |
| EASA approval number |
|
| ATA Chapter |
05 |
Approval Holder
/ Type Designation |
-
FOKKER SERVICES
-
F27
-
MARK050
-
MARK0502
-
MARK0604
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
This AD supersedes EASA AD 2020-0184 dated 18 August 2020.
|
| Publication(s) and related information |
Fokker 50/60 Instructions for Continued Airworthiness, ALS Part 2, Fokker Services Report SE-622 issue 15, dated 06 July 2023.
The use of later approved revisions of the above-mentioned document is acceptable for compliance with the requirements of this AD. |
| PAD number |
23-092 |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. This AD was posted on 07 August 2023 as PAD 23-092 for consultation until 04 September
2023. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section,
Certification Directorate. E-mail: ADs@easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on
a product, part or appliance not affected by this AD, can be reported to the EU aviation safety
reporting system. This may include reporting on the same or similar components, other than
those covered by the design to which this AD applies, if the same unsafe condition can exist or
may develop on an aircraft with those components installed. Such components may be
installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate
(STC) or other modification.
|
