| Number |
2024-0076 |
| Issued by |
 Europe |
| Issue date |
2024-03-19 |
| Effective date |
2024-04-02 |
| EASA approval number |
|
| Contributor |
EASA General Aviation Department |
| ATA Chapter |
57 |
Approval Holder
/ Type Designation |
-
DASSAULT AVIATION
-
Falcon 7X
-
Falcon 7X
-
Falcon 8X (M1000)
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
This AD supersedes EASA AD 2024-0021 dated 17 January 2024.
|
| Publication(s) and related information |
Dassault SB 7X-593 original issue dated 15 March 2023 including its ERRATUM dated 18 September 2023, Revision 1 dated 08 November 2023, and Revision 2 dated 17 January 2024.
Dassault SB 7X-594 original issue dated 15 March 2023, and Revision 1 dated 17 January 2024.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
| PAD number |
24-023 |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. This AD was posted on 15 February 2024 as PAD 24-023 for consultation until 14 March 2024. The Comment Response Document can be found in the EASA Safety Publications Tool, in the compressed ('zipped') file, attached to the record for this AD.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
|
