Safety Publications Tool

2024-0196 : Pneumatic – Overheat Detection System Sensing Elements – Inspection

Number 2024-0196
Issued by Europe  Europe
Issue date 2024-10-18
Effective date 2024-11-01
EASA approval number
ATA Chapter 36
Approval Holder
/ Type Designation
  • AIRBUS S.A.S.
    • A318
      • A318-111
      • A318-112
      • A318-121
      • A318-122
    • A319
      • A319-111
      • A319-112
      • A319-113
      • A319-114
      • A319-115
      • A319-131
      • A319-132
      • A319-133
      • A319-151N
      • A319-153N
      • A319-171N
    • A320
      • A320-211
      • A320-212
      • A320-214
      • A320-215
      • A320-216
      • A320-231
      • A320-232
      • A320-233
      • A320-251N
      • A320-252N
      • A320-253N
      • A320-271N
      • A320-272N
      • A320-273N
    • A321
      • A321-111
      • A321-112
      • A321-131
      • A321-211
      • A321-212
      • A321-213
      • A321-231
      • A321-232
      • A321-251N
      • A321-251NX
      • A321-252N
      • A321-252NX
      • A321-253N
      • A321-253NX
      • A321-253NY
      • A321-271N
      • A321-271NX
      • A321-272N
      • A321-272NX
Revision Not applicable
Correction Not applicable
Supersedure This AD supersedes EASA AD 2022-0147 issued 14 July 2022, including its correction issued 17 August 2022.
Publication(s) and related information Airbus SB A320-36-1085 original issue dated 28 March 2022, or Revision 01 dated 24 October 2022, or Revision 02 dated 19 January 2024, or Revision 03 dated 13 June 2024. Airbus SB A320-36-1087 original issue dated 28 March 2022, or Revision 01 dated 19 January 2024. Kidde Aerospace & Defense SB CFD-26-3 original issue dated 13 January 2022, or Revision 1 dated 29 March 2022. The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD.
Remarks 1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. Based on the required actions and the compliance time, EASA have decided to issue a Final AD with Request for Comments, postponing the public consultation process until after publication. All interested persons may send their comments, referencing the AD Number, to the E-mail address specified in below Remark 3, prior to 15 November 2024. No comments were received during the consultation period. 3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu. 4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.

Download attachments: