| Number |
2026-0006 |
| Issued by |
 Europe |
| Issue date |
2026-01-13 |
| Effective date |
2026-01-27 |
| EASA approval number |
|
| ATA Chapter |
52 |
Approval Holder
/ Type Designation |
-
DIAMOND AIRCRAFT INDUSTRIES
-
H 36 / HK 36
-
H 36 (Dimona)
-
HK 36 (Super Dimona)
-
HK 36 R (Super Dimona)
-
HK 36 TC
-
HK 36 TS
-
HK 36 TTC
-
HK 36 TTC-ECO
-
HK 36 TTS
|
| Revision |
Not applicable
|
| Correction |
Not applicable
|
| Supersedure |
None
|
| Publication(s) and related information |
DAI MSB 36-117 original issue, dated 02 December 2025.
DAI WI-MSB 36-117 original issue, dated 02 December 2025.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD.
DAI AMM-TR-MAM 36-504, dated 27 November 2025.
DAI WHB-TR-MAM 36-504, dated 27 November 2025. |
| PAD number |
25-190 |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. This AD was posted on 15 December 2025 as PAD 25-190 for consultation until 12 January 2026. No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
|
