| Publication(s) and related information |
CFM56-7B S/B 72-1093 initial issue dated 28 January 2025, Revision 01 dated 10 July 2025, or Revision 02 dated 19 January 2026.
CFM56-5C S/B 72-0811 initial issue dated 28 January 2025, Revision 01 dated 10 July 2025 or Revision 02 dated 19 January 2026.
CFM56-5B S/B 72-1125 initial issue dated 28 January 2025, Revision 01 dated 10 July 2025, or Revision 02 dated 19 January 2026.
CFM56-5C S/B 72-0813 initial issue dated 15 July 2025.
CFM56-5B S/B 72-1129 initial issue dated 10 July 2025 or Revision 01 dated 21 January 2026.
CFM56-7B S/B 72-1096 initial issue dated 10 July 2025 or Revision 01 dated 21 January 2026.
The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD. |
| Remarks |
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD.
2. This AD was posted on 08 January 2026 as PAD 26-001 and re-published on 04 February 2026 as PAD 26-001R1 for consultation until 18 February 2026. The Comment Response Document can be found in the EASA Safety Publications Tool, in the compressed (zipped) file attached to the record for this AD.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
5. For any question concerning the technical content of the requirements in this PAD, please contact: CFM International S.A., Customer Support Centre, Telephone: +33 1 64 14 88 66, Fax: +33 1 64 14 87 65, E-mail: cfm.csc[at]safrangroup.com,
or CFM Inc., GE Aerospace Fleet Support, Telephone: +1 513-552-3272 or +1 877-432-3272, E-mail: aviation.fleetsupport[at]ge.com.
|
