Safety Publications Tool
2022-0238 : Doors – Slide Management System Triple Reed Contact Switch – Replacement
EASA approval number
EASA Large Aeroplanes Department
/ Type Designation
This AD supersedes EASA AD 2020-0032 dated 18 February 2020.
Publication(s) and related information
Airbus SB A380-52-8227 original issue dated 16 December 2019. Airbus SB A380-52-8229 original issue dated 09 August 2022. The use of later approved revisions of the above-mentioned documents is acceptable for compliance with the requirements of this AD.
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of Compliance for this AD. 2. This AD was posted on 13 October 2022 as PAD 22-133 for consultation until 10 November 2022 and re-published as PAD 22-133R1 for additional consultation until 01 December 2022. No comments were received on the revised PAD. The Comment Response Document for the original PAD can be found in the EASA Safety Publications Tool, in the compressed (zipped) file attached to the record for this AD. 3. Enquiries regarding this AD should be referred to the EASA Safety Information Section, Certification Directorate. E-mail: ADs[at]easa.europa.eu. 4. Information about any failures, malfunctions, defects or other occurrences, which may be similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on a product, part or appliance not affected by this AD, can be reported to the EU aviation safety reporting system. This may include reporting on the same or similar components, other than those covered by the design to which this AD applies, if the same unsafe condition can exist or may develop on an aircraft with those components installed. Such components may be installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate (STC) or other modification.
EASA_AD_2022_0238.pdf (202 kb)
EASA_PAD_22_133.zip (727 kb)
For help on using this tool, please refer to
the help section
For any inquiry regarding ADs, please contact
the EASA AD team
To report any bug, broken link or problem with this application, please contact the
Disclaimer & copyright notice
- 2021 ©